Sherwin-Williams Alabaster SW 7008: A Warm White That Makes Small Rooms Feel Bigger
I keep coming back to Alabaster when a room feels small and a little cold. Sherwin-Williams lists it as SW 7008, a warm white with an LRV of 82, 82.215 on the manufacturer’s own sheet, and a soft creamy hex, #EDEAE0. It is not stark white. It is a gentle off white that throws most of the light back into the room, which is why it works so well in tight spaces. If you want warmth without yellow walls, start here. Just test it on a big swatch first.
Sherwin Williams Alabaster SW 7008 at a Glance
| Fact | Value |
|---|---|
| Color code | SW 7008 |
| LRV | 82, Sherwin-Williams published 82.215 |
| Hex | #EDEAE0 |
| Undertone | Warm beige-yellow, creamy, softened by gray |
| Color family | Warm white, off white |
| Best rooms | Living rooms, bedrooms, kitchens, halls, whole house |
What Is the LRV of Alabaster?
LRV stands for Light Reflectance Value, and it runs from 0 to 100. Low numbers soak up light. High numbers bounce it back. Alabaster sits at 82, and Sherwin-Williams publishes the exact figure as 82.215, so it lands firmly in the bright warm white range.
You will see some pages list Alabaster’s LRV as 86. That number is wrong. The verified figure is 82, with Sherwin-Williams publishing 82.215, so use 82 when you compare it with other whites.
Alabaster in a Small Room
An LRV of 82 does real work in a small room. It sends about four fifths of the light back off the wall, so a tight room holds on to more of what little light it gets. The walls read farther apart than they would in a mid tone gray or beige. Honestly, that is the main reason I would pick it for a small living room or bedroom.
In low light it stays soft. A cool white can go flat gray in the same spot, and a darker cream can turn muddy, but Alabaster keeps a warm glow near a lamp and still reads as a clean warm white by the window on a gray day. If your room has one small window, that matters a lot more than how the swatch looked in the store.
When the room is small and dim, I would put it on all four walls. One white wall will not lift the whole room on its own. Save an accent wall for when you really want a focal point, and if you do, go deep, something like Iron Ore SW 7069 for that wall as shown in our guide to the best paint colors for small living rooms. For wall color basics in tight spaces, see the best wall colors for small rooms, and for the full method, read the small room color guide.
Alabaster Undertones
Alabaster carries a warm beige-yellow undertone. It is creamy, but there is enough gray in it to keep it from reading as plain yellow paint. That mix is why it feels calm in a living room and cozy in a bedroom. Warm white, not cool white. That is the short version.
The light in your room changes how much of that undertone you see. North light is cool and steady, so Alabaster looks its most neutral there and the gray steps forward. South light is warm and strong, so the beige-yellow side steps forward instead and the walls look warmer by midday. East light keeps it fresh and bright in the morning, then softer in the afternoon. West light warms it up late in the day, and it can look its most golden at sunset.
Warm bulbs push it warmer still. A 2700K bulb lifts the cream a notch, while a daylight bulb near 4000K keeps it closer to the swatch. Most sources agree on that warm beige-yellow base. A few call it more neutral, or stress the gray more than the yellow. I would still sample it on your own wall, in your own light, before you commit. The disagreement is real, and your room gets the final say.
Where to Use Alabaster
You can use Alabaster on walls in almost any room. Living rooms, bedrooms, hallways, kitchens, it fits all of them. It gives you a warm base that lets wood, linen, and black accents stand out. In a small room, keep the ceiling and trim close to the wall color. The edges blur a bit, and the room feels taller.

Alabaster on Cabinets
On cabinets, Alabaster looks soft and classic, not bright and clinical. It suits shaker cabinets, warm wood floors, and brass or black hardware. Pair it with a light countertop to keep the kitchen bright. In a small kitchen, cream cabinets on every run can help, but keep the backsplash light too. You do not want the wall and the cabinet fighting each other.
Trim Colors That Go With Alabaster
For trim, I would use Pure White SW 7005 when I want a clean edge against Alabaster walls. It is brighter, so the trim actually reads as trim. Want something softer? Paint the trim in Alabaster too, in a semi gloss finish, and let the sheen draw the edge instead. Just do not pair it with a cool blue white trim. Next to that, Alabaster can look yellow.
Alabaster in Bedrooms
A bedroom is where Alabaster earns its keep. It feels warm at night and calm in the morning, and it works with linen bedding, light wood, and one dark accent, a charcoal headboard or dark nightstands, say. In a small bedroom, paint all four walls and keep the bedding light, so the bed does not crowd the walls.

Alabaster on Doors and Exteriors
It works on interior doors too, in the same finish as the trim, for a soft whole house look. Outside, it reads as a warm white house color, and it looks brighter out there than it does inside, because daylight is stronger. Test it on a large board outside, facing the street, before you paint the whole house. Check it at noon and again at dusk.
Alabaster as a Whole-House Color
You can run Alabaster through a whole house. It links rooms without a hard color break, which helps a lot in open plan living. Change the accent from room to room, not the wall color. Keep one trim white through the house, and use the same sheen in each room type, so it reads as one choice, not a bunch of different ones.
Coordinating Colors
These three Sherwin-Williams colors pair with Alabaster, each from review sources I checked. Use Pure White for trim, Accessible Beige for a soft companion wall, and sherwin williams iron ore sw 7069 for a strong accent. Sherwin-Williams also lists Townhall Tan SW 7690 and Dakota Wheat SW 9023 as coordinating colors.
| Color | Code | LRV | Use |
|---|---|---|---|
| Pure White | SW 7005 | 84 | Trim, ceilings, doors |
| Accessible Beige | SW 7036 | 58 | Companion wall |
| Iron Ore | SW 7069 | 6 | Accent wall, door |
Alabaster vs Greek Villa
Greek Villa SW 7551 is the closest warm white rival to Alabaster. Put Sherwin-Williams Alabaster SW 7008 next to Greek Villa and the pick comes down to your light and your trim.
| Fact | Alabaster | Greek Villa |
|---|---|---|
| Code | SW 7008 | SW 7551 |
| LRV | 82, 82.215 | 84, 84.223 |
| Hex | #EDEAE0 | #F0ECE2 |
| Undertone | Warm beige-yellow, gray softened | Warm, creamy, soft yellow base |
My take: pick Alabaster when you want more depth and warmth, especially in cool north light. Pick sherwin williams greek villa sw 7551 when you want the brightest warm white of the pair in a dark room.
Alabaster vs Pure White is a closer call than it looks. Both are near white, with an LRV of 82 for Alabaster and 84 for Pure White. Alabaster reads warmer and creamier, while Pure White reads cleaner, which is why I would use Pure White for trim and keep Alabaster on the walls.
How Much Does Alabaster Paint Cost?
The prices below are list prices I checked on November 13, 2026. They are not what anyone paid, and they can change with store sales, so check your local Sherwin-Williams store before you buy.
| Item | Price, as of November 13, 2026 | Coverage |
|---|---|---|
| Emerald, per gallon | $101.49 to $106.49 | 350 to 400 sq ft, 32.5 to 37.2 sq m |
| Duration, per gallon | $96 to $101 | 350 to 400 sq ft, 32.5 to 37.2 sq m |
| Cashmere, per gallon | $83 to $88 | 350 to 400 sq ft, 32.5 to 37.2 sq m |
| Color to Go sample, quart | about $9.59 list | Small test area only |
| Room, two coats, 8 ft ceilings | Wall area | Two coats | Buy |
|---|---|---|---|
| 10 by 10 ft, 3.0 by 3.0 m | 290 sq ft, 26.9 sq m | 580 sq ft, 53.9 sq m | 2 gallons |
| 12 by 14 ft, 3.7 by 4.3 m | 376 sq ft, 34.9 sq m | 752 sq ft, 69.9 sq m | 2 gallons |
A 10 by 10 ft room needs 1.5 to 1.7 gallons, so buy 2. A 12 by 14 ft room needs 1.9 to 2.1 gallons, so buy 2 as well, and keep the receipt for a third if your walls are rough or the old color is dark. Start with a sample pot and live with a large test patch for two days.
Mistakes to Avoid
Do not pick Alabaster from a small swatch alone. Paint a patch at least 2 ft by 2 ft on the wall you see most, and do not judge it under store lights. Do not pair it with cool blue white trim, because that trim makes it look yellow. Do not skip primer over a dark old color, or Alabaster may need a third coat. And do not expect it to light a windowless room. No paint makes light where there is none.

Frequently Asked Questions
Is Alabaster too yellow?
Not in most rooms, no, but it can look yellow in the wrong light. It has a warm beige-yellow undertone, so it reads creamy in neutral light. In a south facing room, under warm bulbs, or next to cool white trim, the yellow can show more. Sample it first, with Pure White trim.
Is Sherwin Williams Alabaster warm or cool?
Warm. Its undertone is warm beige-yellow, softened by gray. It feels warmer than Pure White and cooler than a true cream beige, which is why it works as a whole house warm white.
Alabaster vs White Dove, which is better?
That one depends on your light. White Dove is a Benjamin Moore warm white with a soft gray undertone, and in some rooms it reads a touch softer and less yellow than Alabaster. Sample both on the same wall and pick the one that looks calm at night.
Can you use Alabaster for a whole house?
Yes. Sherwin-Williams Alabaster SW 7008 works as a whole house color because it is warm, bright, and easy to pair with wood, linen, and dark accents. Use Pure White trim through the house, and test it in the darkest room first.
Sources
LRV, hex and color code are from Sherwin-Williams, at sherwin-williams.com. Gallon prices were checked against Sherwin-Williams list prices and price guides on November 13, 2026, including ThePricer Sherwin-Williams paint prices. Written by Wasim.
