sherwin williams iron ore sw 7069 accent wall in a small living room with light oak sofa and brass lamp

Sherwin-Williams Iron Ore SW 7069: LRV, Undertones and Where a Soft Black Works

Sherwin Williams Iron Ore SW 7069 is a soft black with an LRV of 6, which means it reflects only about 6 percent of the light that hits it. It reads as charcoal in bright light and as near-black in dim light, and it carries a faint warm green-brown undertone that keeps it from looking flat. My verdict: use it on one accent wall, on cabinets, or on a front door, and do not paint all four walls of a small dark room with it. That is the honest position, and the rest of this guide shows the math behind it.

sherwin williams iron ore sw 7069 accent wall in a small living room with light oak sofa and brass lamp

At a Glance: Sherwin-Williams Iron Ore SW 7069

SpecDetail
Color codeSW 7069
LRV6 (Sherwin-Williams published 5.55)
Hex#434341
RGB67, 67, 65
Color familyBlack, soft charcoal
UndertoneWarm charcoal with a faint green-brown trace
Best usesCabinets and islands, accent walls, front doors, exteriors
FinishesSatin or semi-gloss for cabinets and doors, eggshell or matte for walls

Sherwin-Williams publishes the LRV as 5.55, and nearly every review rounds it to 6. A few pages list a hex of #43423E or #434446, but #434341 is the majority figure, and it matches the published RGB values.

What Is the LRV of Iron Ore?

The LRV of Iron Ore is 6. On the 0 to 100 scale, 0 is absolute black and 100 is pure white, so 6 sits very near the bottom. A wall painted in Iron Ore absorbs about 94 percent of the light that hits it and reflects only about 6 percent back into the room.

That number is the whole story for small rooms. Compare it with Alabaster, which has an LRV of 82. An Iron Ore wall reflects roughly one-fourteenth as much light as an Alabaster wall. For scale, Tricorn Black has an LRV of 3 and Peppercorn has an LRV of 10. Iron Ore sits between them, darker than charcoal, lighter than true black.

Iron Ore Undertones: What the Experts Disagree About

Undertones are where the reviews split, and I am going to report the split honestly instead of picking one side and pretending the others do not exist.

The majority view is that Iron Ore has a subtle green undertone. The Color Concierge, a certified color expert, calls the green undertones “invisible” but real, and says they are what make Iron Ore a warm black. A few reviewers add a faint brown or olive trace in warm light. The minority view says Iron Ore is neutral, with no undertone worth naming, and that its warmth or coolness comes only from the light and the colors around it. One review notes a gray-blue flash in very bright light, and another finds a hint of purple in warm lighting.

The swatch will not settle the question, because Iron Ore shifts through the day. In morning light it can look like a soft charcoal, and under warm bulbs it shows its brown side. So sample it properly. Paint a swatch at least 2 ft by 2 ft (60 by 60 cm) on the actual wall, live with it for two days, and check it morning, noon, and night. A peel-and-stick sample costs about $3.95 from Sherwin-Williams. Do not judge this color from a phone screen.

Iron Ore vs Tricorn Black: Which Soft Black Should You Pick?

This is the comparison most people search for, and the answer is simple once you see the numbers side by side.

Iron Ore SW 7069Tricorn Black SW 6258
LRV63
Hex#434341#2F2F30
What it isSoft black, dark charcoalTrue neutral black
UndertoneFaint green-brownNone, true neutral
In dim lightReads near-black but keeps a charcoal castStays flat, inky black
Best forCabinets, islands, large surfacesDoors, trim, sharp contrast

Best for: Iron Ore, if you want dark paint across a larger area and still want the room to feel livable. Tricorn Black, if you want the sharpest, cleanest black line you can buy. Main advantage: Iron Ore gives you drama without the hard edge. Its extra three LRV points double the reflected light compared with Tricorn Black. Watch out for: Tricorn Black shows every flaw in the wall underneath it, and it never softens. Verdict: Pick Iron Ore for cabinets, islands, and accent walls. Pick Tricorn Black for a front door or trim where you want one crisp black statement.

Peppercorn SW 7674, at LRV 10, is the lighter step down. It reads as a true charcoal gray rather than a soft black, and in some lights it can flash blue or purple. If Iron Ore feels too heavy for your room but you still want a dark wall, Peppercorn is the next step up the lightness ladder.

Where Iron Ore Works: Room by Room

Iron Ore on Cabinets and Islands

This is Iron Ore at its best. Dark cabinets ground a kitchen, hide everyday marks better than white, and make brass hardware and white quartz counters pop. The most forgiving layout is the tuxedo kitchen: Iron Ore on the lower cabinets or the island, with white uppers. A full run works too, but only with light counters, a white backsplash, and good lighting. Use satin or semi-gloss, since the slight sheen wipes clean. If you are renting, skip this one. Painting landlord cabinets is a 1 out of 5 on renter-friendliness, with a 5 out of 5 deposit risk, so check your lease first. For more cabinet color ideas in small kitchens, see our roundup of kitchen cabinet colors for 2026.

Best for: Lower cabinets and islands with white counters and good light. Verdict: The single best use of Iron Ore in the house.

sherwin williams iron ore kitchen cabinets and island with white uppers and brass hardware

Iron Ore in Bedrooms

In a bedroom, Iron Ore belongs on one wall, the wall behind the bed. A dark headboard wall makes the bed the focal point, and the rest of the room stays light enough to wake up in. Light bedding, warm wood, and a soft lamp on each side keep the dark wall from feeling cold. Four walls can work in a large bedroom with big windows, but in a small bedroom they shrink the room visually and make mornings gloomy.

Best for: One accent wall behind the bed. Verdict: Accent wall yes, four walls only in a big bright bedroom.

sherwin williams iron ore accent wall behind a bed in a small bedroom with cream bedding

Iron Ore in a Home Office

A home office is one of the best rooms for Iron Ore, because you control the light. A dark wall behind your desk looks sharp on video calls, hides cable clutter visually, and makes a light wood desk stand out. Keep the other walls light, add a good desk lamp, and the room stays bright enough to work in all day.

Best for: The wall behind a desk, especially for video calls. Verdict: A strong pick, as long as the lighting is planned, not assumed.

Iron Ore on the Front Door and Exteriors

A front door is the lowest-risk way to try Iron Ore. It is one small surface, it takes one quart of paint, and it makes the whole entrance look more expensive. Use exterior paint in satin or semi-gloss, and paint on a dry day. Renters, check the lease first. Renter-friendliness is 2 out of 5 here, deposit risk 3 out of 5. As an exterior accent, Iron Ore also works on shutters and on siding in a modern home, and reviewers note it does not risk leaning green outside. On a small house, a full Iron Ore exterior can look heavy, so use it on one element and keep the rest light.

Best for: Front doors, shutters, and modern exteriors with white contrast. Verdict: The easiest first try of Iron Ore anywhere in the house.

sherwin williams iron ore front door with white trim and brass house numbers

Iron Ore as an Accent Wall

The accent wall is the classic Iron Ore move, and it is the one I recommend most. Pick the wall with the least natural light, or the wall you want to feature, and paint only that one. Keep the other walls in a light warm white, add white trim, and the dark wall reads as depth rather than darkness. This is also the most renter-friendly way to use Iron Ore, at 4 out of 5, because one wall is cheap to repaint, and a peel-and-stick dark panel gives a similar effect with no paint at all. Deposit risk is 2 out of 5 for one painted wall, and near zero for peel-and-stick.

Best for: Media walls, dining rooms, and headboard walls. Verdict: Start here if you are unsure. It is the safest way to live with a dark color.

Where Does Sherwin Williams Iron Ore SW 7069 Work Best in a Small Room?

Here is the honest answer. Sherwin Williams Iron Ore SW 7069 works best in a small room on one wall, not four. That is the accent-wall-first verdict, and the math backs it up.

A small room, say 10 ft by 10 ft (3 by 3 m), has about 320 sq ft (29.7 sq m) of wall. With an LRV of 6, four Iron Ore walls absorb roughly 94 percent of the light that hits them. The room does not just look dark, it stays dark, because the walls give almost no light back. The room feels smaller because your eye has no bright surface to rest on.

Now paint just one wall in Iron Ore and keep the other three in a light color with an LRV above 80. That one dark wall still gives you the drama, the depth, and the focal point, but the three light walls bounce light around the room. Our guide to the best paint colors for small living rooms explains the same light-bounce rule across seven colors, and Iron Ore is the extreme case that proves it. The exception is a small room with a lot of light: big windows, south-facing, white ceiling, light floor. In that room, two Iron Ore walls can work. Start with one wall.

Coordinating Colors That Go With Iron Ore

Iron Ore needs light partners. A dark color without light contrast looks muddy, so pair it with whites and light neutrals, not with more dark colors.

ColorCodeLRVRole
Pure WhiteSW 700584Trim and ceilings, the crisp partner
SnowboundSW 700483Walls next to an Iron Ore accent
Agreeable GraySW 702960Walls in the same room, soft and warm
AlabasterSW 700882Warm white walls, the soft partner
Extra WhiteSW 700686Bright trim if Pure White feels too warm
Nebulous WhiteSW 706375A softer wall white for low light

Alabaster SW 7008, the warm white we profiled as the soft partner to Iron Ore, works beautifully on the walls around an Iron Ore accent wall or island.

For trim, Pure White is the safe pick. For walls next to Iron Ore, sherwin williams agreeable gray sw 7029 at LRV 60 is warm enough to sit beside it without clashing, and Snowbound at LRV 83 keeps the room bright.

What Iron Ore Costs: Prices and Paint Math, as of November 2026

Dark colors need good paint and good primer. A cheap paint over a light wall takes three coats to cover, and that wipes out any saving on the gallon. Buy the better line, use a gray-tinted primer, and plan on two coats.

ItemPrice, as of November 2026
Emerald Interior, per gallon$101.49 to $106.49
Duration Home, per gallon$96 to $101
Cashmere, per gallon$83 to $88
Color to Go sample, quartabout $9.59 list
Peel-and-stick sample, 8 by 8 in$3.95
Gray-tinted primer, per gallonabout $30 to $40

Prices are list prices from Sherwin-Williams stores, checked in November 2026. The Emerald range was re-verified against October 2026 list prices this month, the Cashmere range was confirmed the same way, and the Duration Home range is the figure verified on November 13, 2026. Sherwin-Williams runs 30 to 40 percent off sales every four to six weeks, so the price you actually pay is often well below list.

Coverage is 350 to 400 sq ft per gallon per coat (32.5 to 37.2 sq m). A 10 ft by 10 ft room (3 by 3 m) with an 8 ft (244 cm) ceiling has about 320 sq ft (29.7 sq m) of wall, or about 600 sq ft for two coats after a door and a window, so buy 2 gallons. A 12 ft by 14 ft room (3.7 by 4.3 m) has about 416 sq ft (38.6 sq m) of wall, or 760 sq ft for two coats, so buy 2 gallons plus 1 quart for touch-ups.

Project totals for 2 gallons: Emerald $202.98 to $212.98, Duration Home $192 to $202, Cashmere $166 to $176. Add one gallon of gray-tinted primer at about $30 to $40. A single accent wall, about 80 sq ft (7.4 sq m), needs one gallon for two coats, so budget $83 to $107 for the paint, plus a quart of gray-tinted primer if you do not already have one. Time estimate: one accent wall takes 3 to 4 hours including prep, a small room takes a full weekend, and kitchen cabinets take 2 to 3 days.

Mistakes to Avoid With Iron Ore

Skipping the sample. Iron Ore changes more with light than most colors. A $3.95 peel-and-stick sample or an $11 quart saves you from repainting a whole room. Painting four walls in a small dark room. Four walls at LRV 6 in a room with one small window will feel dark all day. Start with one wall. Skipping primer. Iron Ore over a white wall without a gray-tinted primer takes three coats. With primer, it takes two. Using flat paint on cabinets or doors. Flat paint marks easily and it is hard to clean. Satin or semi-gloss is the right finish for anything hands touch. Pairing it with cool gray walls. Iron Ore has a warm trace, and cool blue-gray walls fight it. Painting the wall with the window. The dark wall should be the one you look at, not the one the light comes through.

What to Skip

Skip the full dark ceiling in a small room unless the room is large and bright. A dark ceiling lowers the room visually, and in a small room that is the opposite of what you want. Skip Iron Ore on every wall of a rental. One accent wall is reversible in an afternoon, and four walls is a weekend of repainting your landlord will notice. Skip the cheapest paint line for this color, since dark colors need hide and coverage, and the budget lines need an extra coat that costs more than the saving. Skip matching dark floors with dark walls. Keep the floor light or the furniture light, ideally both.

Sources

  • Sherwin-Williams, “Designers on the Modern Kitchen,” a real 2026 kitchen built around Iron Ore SW 7069 cabinets: sherwin-williams.com
  • The Color Concierge, “Sherwin-Williams Iron Ore 7069 Color Review,” certified color expert review with LRV 6, green undertones, and room guidance: thecolorconcierge.com

Sherwin-Williams is a trademark of The Sherwin-Williams Company. This site is not affiliated with or endorsed by Sherwin-Williams.

How This Was Made

This guide was researched from live search results and review pages in November 2026, and every price, LRV, and hex value was checked against at least one published source before writing.

sherwin williams iron ore sw 7069 Pinterest pin, a soft black for small rooms

Is Iron Ore black or grey?

No. Sherwin Williams Iron Ore SW 7069 sits between black and grey. It is a soft black, or a very dark charcoal, with an LRV of 6. True black colors like Tricorn Black have an LRV of 3, and true charcoals like Peppercorn sit at 10. Iron Ore reads as near-black in dim light and as warm charcoal in bright light, so it is neither a pure black nor a grey.

What is the LRV of Iron Ore SW 7069?

The LRV of Iron Ore SW 7069 is 6. Sherwin-Williams publishes the precise figure as 5.55, and most reviews round it to 6. That means the color reflects about 6 percent of visible light and absorbs about 94 percent, which is why it reads so dark on a wall and why it needs good lighting in the room.

Does Iron Ore have green undertones?

Yes, most experts say it does, but the green is faint and it is invisible in some lights. The Color Concierge calls them invisible green undertones that make Iron Ore a warm black. Other reviewers report a brown or olive trace in warm light, and a few say they see no undertone at all. The honest answer is that the undertone is subtle and it shifts with the light, so test a large sample on your own wall before you commit.

Is Iron Ore too dark for a small room?

It is too dark for four walls in a small, dim room, but it works well on one wall. An LRV of 6 means the walls absorb about 94 percent of the light, so four dark walls leave a small room gloomy. One Iron Ore accent wall with light walls around it gives you the drama without losing the brightness, and that is the layout most reviewers recommend for small rooms.

Similar Posts